Air compressor with mag starter

House Repair Talk

Help Support House Repair Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

aaxxllee

New Member
Joined
Aug 29, 2023
Messages
1
Reaction score
0
Location
Texas
I am back to try and hook up my Frankenstein compressor. 60 gal tank, Ebay 5hp motor, HF 5 HP, 145 PSI V-Style Single Stage Cast Iron Air Compressor Pump, Mag starter with run, stop buttons on front of case and I need advice on wiring the mag starter and pressure switch to the motor. I have a 30amp 230v junction box reserved for the project. I would like to use the buttons on the mag starter to start and stop the compressor, if possible. Please help me understand which wires go to the different connections. I looked at so many different setups, I am thoroughly confused now! I know an electrician is my best bet and may have to go that route if unable to get it setup, but really want to try to do it to learn. Any help greatly appreciated, sorry for the long post. Re-posting pics below. The labeled 000 is a pic I found online that I'm hoping to somewhat copy with my setup, if doable.
P.S. any drawings or sketches would help someone like me.
 

Attachments

  • 1.jpg
    1.jpg
    103.3 KB
  • 1a.jpg
    1a.jpg
    43.7 KB
  • 3ab.jpg
    3ab.jpg
    1.1 MB
  • 2.jpg
    2.jpg
    87.5 KB
  • 2a.jpg
    2a.jpg
    118.8 KB
  • 3.jpg
    3.jpg
    377.5 KB
  • 3motor .jpg
    3motor .jpg
    687.5 KB
  • 000.JPG
    000.JPG
    105.3 KB
In my opinion a mag starter is the wrong device for the compressor. All you need is a disconnect on the wall and the pressure switch turns the motor on and off.
 
Back
Top